Aravind Power Systems

Trolley Mounted Compressors 185-1100 cfm

APadmin — Fri, 26 Oct 2018 07:13:26 +0000

Known for their reliability and ruggedness, ELGi portable compressors are available in single and two stage models to meet a wide range of applications like jack hammers, rock drills, impact wrenches, chipping tools and sand blasting.

Applications:

Cable laying
Construction sites
Mining
Sandblasting
CBM (Coal Bed Methane)/oil & gas exploration

Energy efficient eta V profile air ends
Highly reliable and works in the most demanding of work sites
Complete range covering single stage models up to 250 psi and two stage models above 250 psi
Centralized control panel for ease of use
Select models available with international warranty on engines
Easy maneuverability allows quick turns and climbing slopes
Large access doors for ease of maintenance
Tow bars designed for safe highway running. Single and multi-axle tow bar options available
Industrial grade steel and powder coated canopy for maximum corrosion protection and durability

Click To Download The Brochure

Phone
This field is for validation purposes and should be left unchanged.
Name*
Company Name
Email*
Phone*
Country*
State*
Post Title*
Message*
CAPTCHA

The post Trolley Mounted Compressors 185-1100 cfm first appeared on Aravind Power Systems.

Air Accessories

APadmin — Mon, 13 Aug 2018 12:09:56 +0000

Compressed air generated by air compressors contain inherent impurities that are detrimental to compressed air conveying and the end application. Some common contaminants of compressed air can be water, dirt, small wear particles, bacteria and sometimes even degraded lubricating oil. All these impurities mix together and often form an acidic sludge that might increase the wear and tear of end applications like pneumatic tools, machineries, valves orifices and electro pneumatic controls like relays etc.,Only compressed air that is totally clean and dry shall ensure reliable working of compressed air systems and maximise energy savings. ELGi offers a wide range of pneumatic downstream and upstream accessories that make the air friendly to the environment and end use. The air treatment downstream accessories offered by ELGi are called AIRMATE systems and energy conservation systems are classified as ELGi CONSERVE.

DOWNLOADS
REQUEST A QUOTE

Click To Download The Brochure

Email
This field is for validation purposes and should be left unchanged.
Name*
Company Name
Email*
Phone*
Country*
State*
Post Title*
Message*
CAPTCHA

The post Air Accessories first appeared on Aravind Power Systems.

11 – 75 kW EG Series Screw Compressors

APadmin — Mon, 13 Aug 2018 10:13:11 +0000

The EG series compressors represent a giant leap in design and performance with each component designed for reliability and ease of maintenance. The compressor is manufactured in compliance with applicable international standards (CE , ASME, UL and others) and designed as per the international quality standards. These new generation compressors significantly reduce operating costs and provide cost savings with fast return on investment .

Eco-Friendly
High Operator Safety
Robust Construction with Reliability Built on Every Component
Compact, Aesthetically Appealing and Easy to Install at Assembly Area
Low Lifecycle Cost
Energy Efficient

Download 50 Hz Brochure Download 60 Hz Brochure

Instagram
This field is for validation purposes and should be left unchanged.
Name*
Company Name
Email*
Phone*
Country*
State*
Post Title*
Message*
CAPTCHA

The post 11 – 75 kW EG Series Screw Compressors first appeared on Aravind Power Systems.

EN Series Screw Compressors 2.2 to 75 kW

APadmin — Mon, 13 Aug 2018 09:56:42 +0000

ELGi’s EN Series screw compressors are designed to encapsulate all functional components of the compressor within a common housing. With a small footprint, high reliability and low maintenance requirements, these compressors are ideal for industrial applications where size, efficiency and cost matter.

Applications

Textiles
Food processing
Paper
Automotive
Small machining and fabrication workshops

Energy efficient airend
Compact footprint and low running noise
Reliable and low running cost
Models available as base/mounted variants and also with side mounted drier
2.2kW to 5.5kW are available with 220L receiver and 7.5 to 15kW are available with 270L receiver
Easy monitoring of system parameters with user friendly neuron controller

Click To Download The Brochure

Phone
This field is for validation purposes and should be left unchanged.
Name*
Company Name
Email*
Phone*
Country*
State*
Post Title*
Message*
CAPTCHA

The post EN Series Screw Compressors 2.2 to 75 kW first appeared on Aravind Power Systems.

200 – 250 kW EG Series Screw Compressors

APadmin — Wed, 18 Jul 2018 12:12:25 +0000

The EG Series compressors represent a giant leap in design and performance with each component designed for reliability and ease of maintenance. The compressor is manufactured in compliance with applicable international standards (UL, ASME, CE and others) and designed as per the international quality standards. These new generation compressors signiﬁcantly reduce operating costs and provide cost savings with fast return on investment .

Applications

Cement
Textiles
Paper & pulp
Machine tool shops
Steel making
Food processing
Automotive

Oil carry over less than 1ppm
Grouped service points ensure easy access to components for maintenance
Optimized cooler design and cooling fans ensure low running temperatures
Versatile neuron II micro controller provides easy diagnostics of system parameters
Models available as bare units/side located drier/variable speed drive variants
Energy efficient eta profile airends & gear drive to reduce energy consumption
Wide range of accessories – vertical air receivers, driers, automated supply side controller and variable frequency drives to meet diverse operating conditions

Click To Download The Brochure

Comments
This field is for validation purposes and should be left unchanged.
Name*
Company Name
Email*
Phone*
Country*
State*
Post Title*
Message*
CAPTCHA

The post 200 – 250 kW EG Series Screw Compressors first appeared on Aravind Power Systems.

Heat Recovery System

APadmin — Thu, 28 Sep 2017 06:14:09 +0000

It is a surprising fact that 100% of the electrical power (energy) is converted to heat energy during the Compression process In an Air compressor & all the heat energy goes as a waste if not used judicially.In a typical compression system, the theoretical recoverable heat is 96% of the overall electrical energy consumption. It consists of heat dissipated in the oil cooler (78%) the aer cooler (13%) and the heat radiated from the drive Motor (5%). The rest 4% heat cannot be recovered since 2% radiates through the canopy and the other 2% vents inside the canopy. Keeping in mind the eﬀects of Global warming in the present environment. ELGi has come up with a system where in 96% of the waste heat generated from the compressor can be utilized for heating air (space) and heating water. This in turn eliminates the necessity to go for an additional equipment to heat water or Air, there by reducing the CO2 emission to a larger extent.

DOWNLOADSREQUEST A QUOTE

Click To Download The Brochure

Oops! We could not locate your form.

The post Heat Recovery System first appeared on Aravind Power Systems.

TRC 1000 MN-UG

APadmin — Thu, 19 Dec 2013 12:45:10 +0000

Upgraded version of TRC1000MN
Robust in design with enhanced performance and less maintenance
These compressors are used in conventional loco model WAP4, WAG5 and WAG7 locomotives manufactured by Chittaranjan Locomotives Works, Chittaranjan and BHEL, Jhansi
Unique ‘Disc Type Coupling’ arrangement which requires very less attention and can take larger misalignment
Efficient air filtration system ensures higher compressor efficiency and low noise level

Click To Download The Brochure

Company
This field is for validation purposes and should be left unchanged.
Name*
Company Name
Email*
Phone*
Country*
State*
Post Title*
Message*
CAPTCHA

The post TRC 1000 MN-UG first appeared on Aravind Power Systems.

RR 20100 CG (M)

APadmin — Thu, 19 Dec 2013 12:44:01 +0000

These compressors are meant for new generation 3 – phase locomotives model WAG9 and WAP5, WAP7 manufactured by Chittaranjan Locomotives Works, Chittaranjan
Unique underslung mounting design for locomotives
Customer friendly, adopted flange type joints and easy access suction filters
Improved design to meet railway reliability maintenance cycle
Meeting additional air requirement of air spring suspension system introduced in high speed trains Duranto & Rajdhani

Click To Download The Brochure